Skip to content
Find my rebates
Free planning tool

Heat Pump Sizing Calculator

Explore a preliminary heating-load scenario for your home.

Your result

Let’s run the numbers.

Enter your values, then calculate. No information is sent or saved.

Explore rebate programs →

How this calculator works

Area × your assumed BTU/h per square foot = preliminary heating-load scenario. Dividing by 12,000 gives nominal tons. The default 25 is an illustrative assumption, not a recommendation for your climate. This tool cannot select equipment; use a room-by-room load calculation and low-temperature performance data from a qualified designer.

Full methodology →

How to use the heat pump sizing calculator

  1. Enter the conditioned floor area of your home in square feet (heated and cooled space only).
  2. Enter a heating load factor in BTU per hour per square foot. The default of 25 is only an example to get started.
  3. Click Calculate to see a rough heating load in BTU per hour and in tons.

Worked example

A 1,800 sq ft home with a load factor of 25 gives 45,000 BTU/h, or 3.75 tons. Change the factor to see how much the answer depends on your assumption.

Why this is only a starting point

The heat a home needs depends on its climate, insulation, windows, air leaks and ductwork. A single number per square foot cannot capture those differences, so use this result to start a conversation with installers, not to choose equipment.

For the real answer, ask your installer for a room-by-room load calculation. ACCA Manual J is the ANSI-recognized standard for residential load calculations. In colder areas, also ask about cold-climate models: the U.S. Department of Energy notes these are designed to perform in temperatures as low as 5°F.

Related tools

Frequently asked questions

What is a ton in heat pump sizing?

A ton is a unit of heating or cooling capacity equal to 12,000 BTU per hour. It has nothing to do with weight.

What load factor should I use?

There is no single right number, because homes differ in climate, insulation and air leakage. Try a few values to see the range, then rely on a professional load calculation.

Can I size a heat pump from this result alone?

No. Equipment should be chosen from a proper load calculation and the manufacturer’s performance data for your climate.

Sources