Heat Pump Sizing Calculator
Explore a preliminary heating-load scenario for your home.
Your result
Let’s run the numbers.
Enter your values, then calculate. No information is sent or saved.
How this calculator works
Area × your assumed BTU/h per square foot = preliminary heating-load scenario. Dividing by 12,000 gives nominal tons. The default 25 is an illustrative assumption, not a recommendation for your climate. This tool cannot select equipment; use a room-by-room load calculation and low-temperature performance data from a qualified designer.
Full methodology →How to use the heat pump sizing calculator
- Enter the conditioned floor area of your home in square feet (heated and cooled space only).
- Enter a heating load factor in BTU per hour per square foot. The default of 25 is only an example to get started.
- Click Calculate to see a rough heating load in BTU per hour and in tons.
Worked example
A 1,800 sq ft home with a load factor of 25 gives 45,000 BTU/h, or 3.75 tons. Change the factor to see how much the answer depends on your assumption.
Why this is only a starting point
The heat a home needs depends on its climate, insulation, windows, air leaks and ductwork. A single number per square foot cannot capture those differences, so use this result to start a conversation with installers, not to choose equipment.
For the real answer, ask your installer for a room-by-room load calculation. ACCA Manual J is the ANSI-recognized standard for residential load calculations. In colder areas, also ask about cold-climate models: the U.S. Department of Energy notes these are designed to perform in temperatures as low as 5°F.
Related tools
- Heat Pump Cost Calculator: budget your project from installer quotes
- Operating Cost Comparison: estimate yearly heating costs
Frequently asked questions
What is a ton in heat pump sizing?
A ton is a unit of heating or cooling capacity equal to 12,000 BTU per hour. It has nothing to do with weight.
What load factor should I use?
There is no single right number, because homes differ in climate, insulation and air leakage. Try a few values to see the range, then rely on a professional load calculation.
Can I size a heat pump from this result alone?
No. Equipment should be chosen from a proper load calculation and the manufacturer’s performance data for your climate.
