How our tools and guides work
This page explains where our numbers come from, how our calculators work and how we keep information current.
Start with the assumptions
Our calculators use values you supply. They do not fetch local installer quotes. Each tool explains its formula, exclusions and editable assumptions under the result, and nothing you type is sent to us or saved.
Calculator formulas
- Heat pump cost: equipment + labor + extras, shown as a range up to that subtotal plus your contingency percentage.
- Heat pump sizing: floor area × your BTU per hour per square foot; tons = BTU per hour ÷ 12,000.
- Operating cost: heat pump kWh = annual heat ÷ (3,412 × COP); gas therms = annual heat ÷ (100,000 × furnace efficiency); each multiplied by your rate.
- EV charger install cost: the sum of hardware, materials, labor, panel work and permits.
- Backup power sizing: watts × hours ÷ 1,000, divided by system efficiency and by the usable share of the battery.
Where our data comes from
- Electricity rates: U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (average residential price by state).
- Federal tax credits: the Internal Revenue Service (irs.gov).
- Rebate programs: each program’s official page, linked in its record.
- Heat pump basics: the U.S. Department of Energy.
How often we update
We plan to refresh state electricity rates every three months and to re-check rebate records every one to two months. Each record shows the date we last verified it. A missing record does not mean a program is unavailable, so always confirm with the administrator or your utility.
Professional assessment
Planning calculators cannot replace a home assessment, a professional load calculation, licensed electrical design or a project-specific quote.
Corrections
Spotted an error? Email contact@electrifytips.com with the page link. See our editorial policy for how we handle corrections.
