Quick answer
Start with your electric utility's website: search for your utility's name plus "heat pump rebate". In 2026 most heat pump money comes from utilities and state programs, because the federal tax credit ended for systems installed after December 31, 2025. Then check your state's program, two free lookup tools and your installer, and confirm that both the installer and the equipment qualify before you sign.
Heat pump rebates still exist in 2026, but they’re spread across your utility, your state and a few lookup tools. This guide shows where to look, in order, and the checks that keep you from losing a rebate. To see verified programs for your state right away, use our Rebate Finder.
Step 1: Check your electric utility’s heat pump page
Your electric utility is the most likely source of a heat pump rebate. Find its name on your power bill, then search “[utility name] heat pump rebate” and open the result on the utility’s own website.
On that page, look for three things:
- The amount, often per ton of heating capacity. In Connecticut, for example, it’s $250 per ton.
- Who must install it, usually a contractor from the utility’s approved list.
- Which equipment qualifies, usually a product list or minimum efficiency ratings.
In some states the utilities share one program and one website. In Massachusetts it’s Mass Save, in Wisconsin Focus on Energy, and in New York NYS Clean Heat, where you enter your address to see the offers for your home.
Step 2: Check your state’s program
Many states run a heat pump rebate of their own, separate from the utility. The most common is HEAR (Home Electrification and Appliance Rebates), a federally funded rebate each state runs for households under 150% of area median income.
HEAR is different in every state:
- Open now in some states, such as Wisconsin and North Carolina, both with up to $8,000 toward a heat pump.
- Not open yet in others, such as New Hampshire and South Carolina.
- New limits in some: since September 1, 2026, Wisconsin and North Carolina no longer pay to replace gas, oil or propane equipment.
A few states have their own credit instead. Colorado’s heat pump tax credit, for example, takes at least $333 off an air-source heat pump on the installer’s invoice.
To see which states have HEAR open today, read HEEHR Rebates by State, or pick your state in the Rebate Finder.
Step 3: Use two free lookup tools
Two free tools search many programs at once, so you can catch a rebate you didn’t know about.
- ENERGY STAR Rebate Finder: enter your ZIP code and pick “heat pumps”. It lists offers from utilities and other ENERGY STAR partners near you.
- DSIRE: a large database of state and utility incentives, run by the NC Clean Energy Technology Center. Filter by your state and look for heat pump programs.
Both tools can show offers that have ended or changed. Always open the program’s own page to confirm the amount and the rules before you count on it.
Step 4: Ask your installer, then check them
Installers who work with rebate programs every week often know offers you won’t find yourself. At the home visit, ask: “Which rebates will this system qualify for, and will you file them for me?”
Then check the answer yourself. Most programs pay only when the installer is on their approved list, which goes by different names:
- Mass Save: Heat Pump Installer Network
- Energize CT: Heat Pump Installer Network
- Focus on Energy (Wisconsin): Trade Ally
- HEAR programs: registered contractor
Look the installer up on the program’s own list, not just their website. If the rebate comes off your invoice, ask to see it as its own line on the quote. For more questions to ask, see Questions to Ask a Heat Pump Installer.
What utility and state rebates look like in 2026
Amounts vary a lot by state. These five open programs, checked on their official pages on November 7, 2026, show the range.
| Program | State | Amount | How you get it |
|---|---|---|---|
| Mass Save | Massachusetts | Up to $8,500 (whole-home) | Rebate form after install |
| Energize CT | Connecticut | $250 per ton, up to $2,500 | Approved installer |
| Focus on Energy | Wisconsin | $400 to $700 | Off the invoice |
| Colorado Heat Pump Tax Credit | Colorado | At least $333 (air-source) | Off the invoice |
| NYS Clean Heat | New York | Depends on your utility and home | Approved installer |
Higher amounts are often available for income-qualified households. See every verified program for your state in the Rebate Finder.
Before you sign: 5 checks so you don’t lose the rebate
Many rebate rules apply before the install, and they can’t be fixed afterwards. Check these before you sign the contract.
- Approval first, if the program needs it. Some programs need a reservation before work starts. California’s HEEHRA, for example, required an approved reservation before installation.
- The installer is on the program’s list. Check the program’s own website, as in Step 4.
- The exact equipment qualifies. Ask for the model numbers and match them to the program’s product list or minimum ratings. Our guide to SEER2, HSPF2 and COP explains the ratings.
- The weatherization rules. Some higher rebate tiers need insulation or air sealing first. Mass Save’s whole-home rebate, for example, requires adequate weatherization. See Insulation Before a Heat Pump.
- The deadline. Note when the rebate form is due. For 2026 Mass Save installs, it’s February 28, 2027.
Keep the final invoice, the model numbers and any approval email until the money arrives.
What about the federal tax credit?
The federal heat pump tax credit (25C) is gone for new installs. It covered 30% of the cost, up to $2,000 a year, but only for systems placed in service by December 31, 2025.
That’s why utility and state rebates matter more in 2026. For the full story, see Heat Pump Tax Credit 2026: What Happened to the 25C Credit?
Frequently asked questions
Can I combine a utility rebate with a state rebate?
Often, yes, but each program sets its own rules, and some reduce one rebate when you get another. Check both programs’ pages, or ask your installer to confirm in writing.
Do I need to apply before the heat pump is installed?
It depends on the program. Some need approval first, and others take a form after the install. Check before you sign the contract.
Is there a rebate if I rent my home?
Usually the property owner applies, because they own the equipment. If you rent, talk to your landlord first, and check the program’s rules for renters.
What if my utility has no heat pump rebate?
Check your state’s program and the two lookup tools in Step 3. Some states and cities offer rebates even where the utility doesn’t.
Sources & references
- https://www.masssave.com/residential/rebates-offers-services/heating-and-cooling/heat-pumps/air-source-heat-pumps
- https://energizect.com/rebates-incentives/heating-cooling/heat-pumps/residential-air-source
- https://focusonenergy.com/residential/heating-and-cooling
- https://focusonenergy.com/ira-hear
- https://energyoffice.colorado.gov/hptc
- https://deq.nc.gov/energy-climate/state-energy-office/energy-saver-north-carolina
- https://cleanheat.ny.gov/find-available-rebates/
- https://techcleanca.com/heehra/
- https://www.energystar.gov/rebate-finder
- https://dsireusa.org/
- https://www.irs.gov/credits-deductions/energy-efficient-home-improvement-credit
